And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.753
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.220
And
I accept adding "cowsay" to Additional Software
6.609
And
Additional Software is correctly configured for package "cowsay"
0.924
And
I shutdown Tails and wait for the computer to power off
6.484
And
I start Tails from USB drive "__internal" with network unplugged
59.583
And
I enable persistence
16.022
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.930
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.795
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.123
And
all notifications have disappeared
6.074
And
available upgrades have been checked
0.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.859
And
I can open the Additional Software configuration window from the notification
2.736
And
I shutdown Tails and wait for the computer to power off
11.120
And
I start Tails from USB drive "__internal" with network unplugged
58.944
And
I enable persistence
12.591
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
41.583
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.002
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.369
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084