And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.805
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.415
And
I accept adding "cowsay" to Additional Software
5.356
And
Additional Software is correctly configured for package "cowsay"
0.993
And
I shutdown Tails and wait for the computer to power off
4.393
And
I start Tails from USB drive "__internal" with network unplugged
58.478
And
I enable persistence
11.923
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
44.691
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.692
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.063
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.167
And
I can open the Additional Software configuration window from the notification
3.128
And
I shutdown Tails and wait for the computer to power off
15.160
And
I start Tails from USB drive "__internal" with network unplugged
58.778
And
I enable persistence
13.440
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
41.167
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.136
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.084
And
Tor is ready
1:10.784
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082