And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:54.399
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.999
And
I accept adding "cowsay" to Additional Software
4.767
And
Additional Software is correctly configured for package "cowsay"
0.981
And
I shutdown Tails and wait for the computer to power off
6.606
And
I start Tails from USB drive "__internal" with network unplugged
1:1.575
And
I enable persistence
14.217
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.120
And
I log in to a new session
47.077
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.768
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.104
And
available upgrades have been checked
0.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
10.447
And
I can open the Additional Software configuration window from the notification
3.650
And
I shutdown Tails and wait for the computer to power off
18.693
And
I start Tails from USB drive "__internal" with network unplugged
1:2.517
And
I enable persistence
13.900
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
43.702
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.623
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082