And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.274
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.087
And
I accept adding "cowsay" to Additional Software
7.618
And
Additional Software is correctly configured for package "cowsay"
0.830
And
I shutdown Tails and wait for the computer to power off
4.276
And
I start Tails from USB drive "__internal" with network unplugged
57.658
And
I enable persistence
13.060
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.127
And
I log in to a new session
40.198
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.456
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.066
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.640
And
I can open the Additional Software configuration window from the notification
3.161
And
I shutdown Tails and wait for the computer to power off
13.645
And
I start Tails from USB drive "__internal" with network unplugged
57.505
And
I enable persistence
11.981
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
38.445
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068