And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:50.351
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.441
And
I accept adding "cowsay" to Additional Software
5.353
And
Additional Software is correctly configured for package "cowsay"
1.000
And
I shutdown Tails and wait for the computer to power off
4.298
And
I start Tails from USB drive "__internal" with network unplugged
59.722
And
I enable persistence
12.091
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
40.533
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.682
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.079
And
available upgrades have been checked
2.479
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.384
And
I can open the Additional Software configuration window from the notification
3.127
And
I shutdown Tails and wait for the computer to power off
17.887
And
I start Tails from USB drive "__internal" with network unplugged
59.828
And
I enable persistence
11.425
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.342
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.938
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101