And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.520
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.967
And
I accept adding "cowsay" to Additional Software
6.768
And
Additional Software is correctly configured for package "cowsay"
0.982
And
I shutdown Tails and wait for the computer to power off
4.447
And
I start Tails from USB drive "__internal" with network unplugged
1:5.985
And
I enable persistence
16.154
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.125
And
I log in to a new session
47.543
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.044
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.140
And
available upgrades have been checked
1.304
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.152
And
I can open the Additional Software configuration window from the notification
4.278
And
I shutdown Tails and wait for the computer to power off
2:2.374
And
I start Tails from USB drive "__internal" with network unplugged
1:1.846
And
I enable persistence
13.171
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
47.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.074
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.106
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072