And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.485
And
I configure APT to prefer an old version of cowsay
0.044
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.584
And
I accept adding "cowsay" to Additional Software
3.181
And
Additional Software is correctly configured for package "cowsay"
0.906
And
I shutdown Tails and wait for the computer to power off
6.547
And
I start Tails from USB drive "__internal" with network unplugged
1:1.662
And
I enable persistence
15.160
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
38.300
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.659
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.072
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.742
And
I can open the Additional Software configuration window from the notification
2.937
And
I shutdown Tails and wait for the computer to power off
14.745
And
I start Tails from USB drive "__internal" with network unplugged
1:3.243
And
I enable persistence
13.419
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
39.334
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.573
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104