And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.588
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.380
And
I accept adding "cowsay" to Additional Software
5.920
And
Additional Software is correctly configured for package "cowsay"
1.091
And
I shutdown Tails and wait for the computer to power off
4.763
And
I start Tails from USB drive "__internal" with network unplugged
1:2.394
And
I enable persistence
15.458
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
42.085
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.739
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.091
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.448
And
I can open the Additional Software configuration window from the notification
3.042
And
I shutdown Tails and wait for the computer to power off
2:7.480
And
I start Tails from USB drive "__internal" with network unplugged
1:2.857
And
I enable persistence
11.694
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.250
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093