And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.752
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.538
And
I accept adding "cowsay" to Additional Software
6.803
And
Additional Software is correctly configured for package "cowsay"
0.929
And
I shutdown Tails and wait for the computer to power off
4.200
And
I start Tails from USB drive "__internal" with network unplugged
59.144
And
I enable persistence
11.183
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
39.613
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.736
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.076
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.526
And
I can open the Additional Software configuration window from the notification
2.677
And
I shutdown Tails and wait for the computer to power off
17.839
And
I start Tails from USB drive "__internal" with network unplugged
58.476
And
I enable persistence
13.713
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.358
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.547
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.237
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.144