And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.521
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.827
And
I accept adding "cowsay" to Additional Software
7.544
And
Additional Software is correctly configured for package "cowsay"
0.927
And
I shutdown Tails and wait for the computer to power off
6.586
And
I start Tails from USB drive "__internal" with network unplugged
1:0.295
And
I enable persistence
12.938
And
I configure APT to prefer an old version of cowsay
0.070
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
44.167
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.079
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.084
And
available upgrades have been checked
2.329
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.393
And
I can open the Additional Software configuration window from the notification
2.992
And
I shutdown Tails and wait for the computer to power off
11.639
And
I start Tails from USB drive "__internal" with network unplugged
1:11.506
And
I enable persistence
16.807
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
45.428
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.934
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.099
Then
the Additional Software upgrade service has started
0.363
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.116