And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.050
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.224
And
I accept adding "cowsay" to Additional Software
7.178
And
Additional Software is correctly configured for package "cowsay"
0.917
And
I shutdown Tails and wait for the computer to power off
6.425
And
I start Tails from USB drive "__internal" with network unplugged
59.873
And
I enable persistence
12.832
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
37.982
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.072
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.084
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.530
And
I can open the Additional Software configuration window from the notification
2.878
And
I shutdown Tails and wait for the computer to power off
2:6.598
And
I start Tails from USB drive "__internal" with network unplugged
1:0.036
And
I enable persistence
14.511
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.764
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094