And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.125
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.703
And
I accept adding "cowsay" to Additional Software
4.215
And
Additional Software is correctly configured for package "cowsay"
1.370
And
I shutdown Tails and wait for the computer to power off
4.606
And
I start Tails from USB drive "__internal" with network unplugged
57.641
And
I enable persistence
12.254
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
40.209
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.824
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.063
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.616
And
I can open the Additional Software configuration window from the notification
2.863
And
I shutdown Tails and wait for the computer to power off
18.373
And
I start Tails from USB drive "__internal" with network unplugged
58.495
And
I enable persistence
12.566
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
42.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084