And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.927
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.940
And
I accept adding "cowsay" to Additional Software
6.704
And
Additional Software is correctly configured for package "cowsay"
1.009
And
I shutdown Tails and wait for the computer to power off
6.749
And
I start Tails from USB drive "__internal" with network unplugged
59.215
And
I enable persistence
12.343
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
46.761
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.083
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.088
And
available upgrades have been checked
0.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.584
And
I can open the Additional Software configuration window from the notification
3.192
And
I shutdown Tails and wait for the computer to power off
2:2.636
And
I start Tails from USB drive "__internal" with network unplugged
1:2.303
And
I enable persistence
12.538
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
39.070
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.720
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.100
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095