And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:58.367
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.214
And
I accept adding "cowsay" to Additional Software
6.605
And
Additional Software is correctly configured for package "cowsay"
1.038
And
I shutdown Tails and wait for the computer to power off
6.496
And
I start Tails from USB drive "__internal" with network unplugged
1:7.020
And
I enable persistence
12.810
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.127
And
I log in to a new session
41.119
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.098
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.084
And
available upgrades have been checked
1.237
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.748
And
I can open the Additional Software configuration window from the notification
2.993
And
I shutdown Tails and wait for the computer to power off
2:2.742
And
I start Tails from USB drive "__internal" with network unplugged
1:1.957
And
I enable persistence
13.385
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
42.991
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.633
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.101
Then
the Additional Software upgrade service has started
0.210
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.110