And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:15.106
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.492
And
I accept adding "cowsay" to Additional Software
5.295
And
Additional Software is correctly configured for package "cowsay"
0.831
And
I shutdown Tails and wait for the computer to power off
6.431
And
I start Tails from USB drive "__internal" with network unplugged
57.789
And
I enable persistence
12.380
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.111
And
I log in to a new session
39.173
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.734
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.079
And
available upgrades have been checked
0.222
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.320
And
I can open the Additional Software configuration window from the notification
2.727
And
I shutdown Tails and wait for the computer to power off
13.092
And
I start Tails from USB drive "__internal" with network unplugged
58.497
And
I enable persistence
12.699
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
42.473
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.843
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.102
Then
the Additional Software upgrade service has started
0.216
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.123