And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.379
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.897
And
I accept adding "cowsay" to Additional Software
6.007
And
Additional Software is correctly configured for package "cowsay"
1.003
And
I shutdown Tails and wait for the computer to power off
6.632
And
I start Tails from USB drive "__internal" with network unplugged
1:1.914
And
I enable persistence
12.203
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
43.262
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.478
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.072
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.822
And
I can open the Additional Software configuration window from the notification
2.823
And
I shutdown Tails and wait for the computer to power off
12.868
And
I start Tails from USB drive "__internal" with network unplugged
1:0.323
And
I enable persistence
11.801
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
39.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.154