And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.748
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.104
And
I accept adding "cowsay" to Additional Software
4.429
And
Additional Software is correctly configured for package "cowsay"
1.061
And
I shutdown Tails and wait for the computer to power off
6.909
And
I start Tails from USB drive "__internal" with network unplugged
1:0.267
And
I enable persistence
11.129
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
40.377
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.361
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.081
And
available upgrades have been checked
1.432
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.418
And
I can open the Additional Software configuration window from the notification
3.056
And
I shutdown Tails and wait for the computer to power off
2:6.596
And
I start Tails from USB drive "__internal" with network unplugged
1:3.724
And
I enable persistence
14.698
And
I configure APT to prefer an old version of cowsay
0.040
And
I log in to a new session
41.101
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.673
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.124