And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.151
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.133
And
I accept adding "cowsay" to Additional Software
6.728
And
Additional Software is correctly configured for package "cowsay"
0.897
And
I shutdown Tails and wait for the computer to power off
6.640
And
I start Tails from USB drive "__internal" with network unplugged
1:0.872
And
I enable persistence
13.961
And
I configure APT to prefer an old version of cowsay
0.056
And
I disable the tails-virt-notify-user.service user unit
0.128
And
I log in to a new session
44.599
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.609
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.080
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.982
And
I can open the Additional Software configuration window from the notification
3.350
And
I shutdown Tails and wait for the computer to power off
13.093
And
I start Tails from USB drive "__internal" with network unplugged
1:0.107
And
I enable persistence
12.582
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.179
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.546
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.238
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101