And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:55.277
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.991
And
I accept adding "cowsay" to Additional Software
6.630
And
Additional Software is correctly configured for package "cowsay"
0.894
And
I shutdown Tails and wait for the computer to power off
6.438
And
I start Tails from USB drive "__internal" with network unplugged
1:1.509
And
I enable persistence
12.307
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
46.570
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.686
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.098
And
the network is plugged
0.087
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
20.297
And
I can open the Additional Software configuration window from the notification
2.925
And
I shutdown Tails and wait for the computer to power off
20.049
And
I start Tails from USB drive "__internal" with network unplugged
1:3.789
And
I enable persistence
14.312
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
40.597
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.481
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.216
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.115