And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.962
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.769
And
I accept adding "cowsay" to Additional Software
4.384
And
Additional Software is correctly configured for package "cowsay"
0.952
And
I shutdown Tails and wait for the computer to power off
4.432
And
I start Tails from USB drive "__internal" with network unplugged
1:0.790
And
I enable persistence
12.517
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.118
And
I log in to a new session
40.845
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.076
And
available upgrades have been checked
1.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.033
And
I can open the Additional Software configuration window from the notification
3.680
And
I shutdown Tails and wait for the computer to power off
19.289
And
I start Tails from USB drive "__internal" with network unplugged
1:1.893
And
I enable persistence
13.088
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
41.531
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.094
Then
the Additional Software upgrade service has started
1.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.646