And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.605
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.230
And
I accept adding "cowsay" to Additional Software
4.509
And
Additional Software is correctly configured for package "cowsay"
0.953
And
I shutdown Tails and wait for the computer to power off
6.452
And
I start Tails from USB drive "__internal" with network unplugged
1:1.105
And
I enable persistence
13.377
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
44.184
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.620
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.086
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.101
And
I can open the Additional Software configuration window from the notification
2.999
And
I shutdown Tails and wait for the computer to power off
12.859
And
I start Tails from USB drive "__internal" with network unplugged
1:1.089
And
I enable persistence
13.756
And
I configure APT to prefer an old version of cowsay
0.048
And
I log in to a new session
48.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.647
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.140
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080