And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.399
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.916
And
I accept adding "cowsay" to Additional Software
8.969
And
Additional Software is correctly configured for package "cowsay"
1.169
And
I shutdown Tails and wait for the computer to power off
6.552
And
I start Tails from USB drive "__internal" with network unplugged
58.328
And
I enable persistence
11.460
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
39.856
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.481
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.067
And
available upgrades have been checked
2.500
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.998
And
I can open the Additional Software configuration window from the notification
3.013
And
I shutdown Tails and wait for the computer to power off
19.367
And
I start Tails from USB drive "__internal" with network unplugged
58.781
And
I enable persistence
10.479
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.625
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.285
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090