And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.040
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.665
And
I accept adding "cowsay" to Additional Software
5.972
And
Additional Software is correctly configured for package "cowsay"
1.021
And
I shutdown Tails and wait for the computer to power off
6.385
And
I start Tails from USB drive "__internal" with network unplugged
1:3.425
And
I enable persistence
14.573
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
44.138
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.816
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.067
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.005
And
I can open the Additional Software configuration window from the notification
3.512
And
I shutdown Tails and wait for the computer to power off
2:2.970
And
I start Tails from USB drive "__internal" with network unplugged
1:4.676
And
I enable persistence
17.350
And
I configure APT to prefer an old version of cowsay
0.049
And
I log in to a new session
48.181
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
53.829
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.233
Then
the Additional Software upgrade service has started
0.205
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.139