And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.848
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.712
And
I accept adding "cowsay" to Additional Software
4.677
And
Additional Software is correctly configured for package "cowsay"
0.929
And
I shutdown Tails and wait for the computer to power off
4.548
And
I start Tails from USB drive "__internal" with network unplugged
1:0.327
And
I enable persistence
12.444
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
41.363
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.303
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.087
And
available upgrades have been checked
0.406
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.461
And
I can open the Additional Software configuration window from the notification
2.845
And
I shutdown Tails and wait for the computer to power off
14.542
And
I start Tails from USB drive "__internal" with network unplugged
1:9.301
And
I enable persistence
11.390
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
39.781
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.430
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.101
Then
the Additional Software upgrade service has started
0.232
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094