And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.461
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.799
And
I accept adding "cowsay" to Additional Software
6.856
And
Additional Software is correctly configured for package "cowsay"
0.900
And
I shutdown Tails and wait for the computer to power off
6.690
And
I start Tails from USB drive "__internal" with network unplugged
1:6.905
And
I enable persistence
11.265
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
37.059
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.080
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.352
And
I can open the Additional Software configuration window from the notification
2.130
And
I shutdown Tails and wait for the computer to power off
19.333
And
I start Tails from USB drive "__internal" with network unplugged
58.782
And
I enable persistence
11.813
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.071
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.042
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102