And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.315
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.551
And
I accept adding "cowsay" to Additional Software
8.512
And
Additional Software is correctly configured for package "cowsay"
0.878
And
I shutdown Tails and wait for the computer to power off
6.489
And
I start Tails from USB drive "__internal" with network unplugged
59.942
And
I enable persistence
11.253
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.126
And
I log in to a new session
39.686
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.935
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.062
And
available upgrades have been checked
0.304
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.902
And
I can open the Additional Software configuration window from the notification
3.081
And
I shutdown Tails and wait for the computer to power off
2:7.933
And
I start Tails from USB drive "__internal" with network unplugged
58.035
And
I enable persistence
11.463
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.276
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.396
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.117
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087