And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.287
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.427
And
I accept adding "cowsay" to Additional Software
6.708
And
Additional Software is correctly configured for package "cowsay"
0.892
And
I shutdown Tails and wait for the computer to power off
6.372
And
I start Tails from USB drive "__internal" with network unplugged
1:8.625
And
I enable persistence
11.513
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
38.857
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.091
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.158
And
I can open the Additional Software configuration window from the notification
3.736
And
I shutdown Tails and wait for the computer to power off
2:2.498
And
I start Tails from USB drive "__internal" with network unplugged
56.203
And
I enable persistence
13.028
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.250
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087