And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.596
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.161
And
I accept adding "cowsay" to Additional Software
4.776
And
Additional Software is correctly configured for package "cowsay"
1.086
And
I shutdown Tails and wait for the computer to power off
4.533
And
I start Tails from USB drive "__internal" with network unplugged
1:1.004
And
I enable persistence
16.306
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
45.565
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.292
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.090
And
available upgrades have been checked
1.131
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.921
And
I can open the Additional Software configuration window from the notification
2.979
And
I shutdown Tails and wait for the computer to power off
14.981
And
I start Tails from USB drive "__internal" with network unplugged
1:2.440
And
I enable persistence
18.051
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
42.301
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.752
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
1.436
Then
the Additional Software upgrade service has started
0.211
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.110