And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.842
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.879
And
I accept adding "cowsay" to Additional Software
5.430
And
Additional Software is correctly configured for package "cowsay"
1.015
And
I shutdown Tails and wait for the computer to power off
4.385
And
I start Tails from USB drive "__internal" with network unplugged
1:1.537
And
I enable persistence
14.347
And
I configure APT to prefer an old version of cowsay
0.051
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
41.870
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.961
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.086
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.584
And
I can open the Additional Software configuration window from the notification
3.140
And
I shutdown Tails and wait for the computer to power off
17.587
And
I start Tails from USB drive "__internal" with network unplugged
1:0.539
And
I enable persistence
11.513
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.973
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.928
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.236
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118