And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.060
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.112
And
I accept adding "cowsay" to Additional Software
6.826
And
Additional Software is correctly configured for package "cowsay"
0.952
And
I shutdown Tails and wait for the computer to power off
6.476
And
I start Tails from USB drive "__internal" with network unplugged
1:6.296
And
I enable persistence
12.937
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.122
And
I log in to a new session
41.683
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.771
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.080
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.772
And
I can open the Additional Software configuration window from the notification
3.105
And
I shutdown Tails and wait for the computer to power off
13.228
And
I start Tails from USB drive "__internal" with network unplugged
1:2.464
And
I enable persistence
12.959
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
45.338
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.717
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099