And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.834
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.585
And
I accept adding "cowsay" to Additional Software
7.206
And
Additional Software is correctly configured for package "cowsay"
0.904
And
I shutdown Tails and wait for the computer to power off
6.344
And
I start Tails from USB drive "__internal" with network unplugged
59.357
And
I enable persistence
13.212
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
37.874
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.424
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.427
And
available upgrades have been checked
0.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.963
And
I can open the Additional Software configuration window from the notification
2.768
And
I shutdown Tails and wait for the computer to power off
17.651
And
I start Tails from USB drive "__internal" with network unplugged
1:4.420
And
I enable persistence
12.765
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
42.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.396
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.229
Then
the Additional Software upgrade service has started
0.217
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111