And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.334
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.775
And
I accept adding "cowsay" to Additional Software
6.810
And
Additional Software is correctly configured for package "cowsay"
1.011
And
I shutdown Tails and wait for the computer to power off
4.474
And
I start Tails from USB drive "__internal" with network unplugged
1:3.265
And
I enable persistence
15.475
And
I configure APT to prefer an old version of cowsay
0.040
And
I disable the tails-virt-notify-user.service user unit
0.136
And
I log in to a new session
43.073
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.039
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.176
And
available upgrades have been checked
0.223
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.574
And
I can open the Additional Software configuration window from the notification
2.886
And
I shutdown Tails and wait for the computer to power off
2:2.810
And
I start Tails from USB drive "__internal" with network unplugged
1:0.835
And
I enable persistence
15.042
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
40.209
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.629
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
the network is plugged
0.095
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.110