And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.639
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.490
And
I accept adding "cowsay" to Additional Software
5.319
And
Additional Software is correctly configured for package "cowsay"
0.844
And
I shutdown Tails and wait for the computer to power off
6.429
And
I start Tails from USB drive "__internal" with network unplugged
58.320
And
I enable persistence
12.182
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
38.735
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.864
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.088
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.681
And
I can open the Additional Software configuration window from the notification
2.980
And
I shutdown Tails and wait for the computer to power off
18.124
And
I start Tails from USB drive "__internal" with network unplugged
56.966
And
I enable persistence
11.153
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.851
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.794
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089