And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.446
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.469
And
I accept adding "cowsay" to Additional Software
6.184
And
Additional Software is correctly configured for package "cowsay"
1.216
And
I shutdown Tails and wait for the computer to power off
7.175
And
I start Tails from USB drive "__internal" with network unplugged
1:11.245
And
I enable persistence
16.406
And
I configure APT to prefer an old version of cowsay
0.047
And
I disable the tails-virt-notify-user.service user unit
0.111
And
I log in to a new session
43.933
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.357
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.100
And
the network is plugged
0.090
And
available upgrades have been checked
0.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.953
And
I can open the Additional Software configuration window from the notification
2.748
And
I shutdown Tails and wait for the computer to power off
13.794
And
I start Tails from USB drive "__internal" with network unplugged
1:16.286
And
I enable persistence
17.680
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
44.194
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.549
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.103
Then
the Additional Software upgrade service has started
0.194
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.115