And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:58.430
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.341
And
I accept adding "cowsay" to Additional Software
6.369
And
Additional Software is correctly configured for package "cowsay"
1.305
And
I shutdown Tails and wait for the computer to power off
4.694
And
I start Tails from USB drive "__internal" with network unplugged
1:2.168
And
I enable persistence
12.028
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
48.661
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.120
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.073
And
available upgrades have been checked
1.219
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.295
And
I can open the Additional Software configuration window from the notification
2.884
And
I shutdown Tails and wait for the computer to power off
12.745
And
I start Tails from USB drive "__internal" with network unplugged
1:2.653
And
I enable persistence
14.017
And
I configure APT to prefer an old version of cowsay
0.062
And
I log in to a new session
47.228
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.359
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081