And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:57.006
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.450
And
I accept adding "cowsay" to Additional Software
4.389
And
Additional Software is correctly configured for package "cowsay"
0.952
And
I shutdown Tails and wait for the computer to power off
4.606
And
I start Tails from USB drive "__internal" with network unplugged
1:0.587
And
I enable persistence
13.205
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
47.097
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.028
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.072
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.411
And
I can open the Additional Software configuration window from the notification
2.728
And
I shutdown Tails and wait for the computer to power off
12.902
And
I start Tails from USB drive "__internal" with network unplugged
1:1.566
And
I enable persistence
14.376
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.657
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.095
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095