And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.565
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.362
And
I accept adding "cowsay" to Additional Software
4.408
And
Additional Software is correctly configured for package "cowsay"
0.912
And
I shutdown Tails and wait for the computer to power off
6.171
And
I start Tails from USB drive "__internal" with network unplugged
1:2.005
And
I enable persistence
13.378
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
42.273
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.912
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.075
And
available upgrades have been checked
1.201
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.091
And
I can open the Additional Software configuration window from the notification
3.163
And
I shutdown Tails and wait for the computer to power off
2:3.779
And
I start Tails from USB drive "__internal" with network unplugged
1:1.895
And
I enable persistence
14.156
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
43.592
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.051
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081