And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.187
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.294
And
I accept adding "cowsay" to Additional Software
4.257
And
Additional Software is correctly configured for package "cowsay"
1.282
And
I shutdown Tails and wait for the computer to power off
4.794
And
I start Tails from USB drive "__internal" with network unplugged
1:8.941
And
I enable persistence
16.727
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.130
And
I log in to a new session
41.090
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.681
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.096
And
the network is plugged
0.080
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.732
And
I can open the Additional Software configuration window from the notification
3.201
And
I shutdown Tails and wait for the computer to power off
2:7.595
And
I start Tails from USB drive "__internal" with network unplugged
1:3.777
And
I enable persistence
12.875
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
40.280
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104