And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.227
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.065
And
I accept adding "cowsay" to Additional Software
4.440
And
Additional Software is correctly configured for package "cowsay"
0.923
And
I shutdown Tails and wait for the computer to power off
6.365
And
I start Tails from USB drive "__internal" with network unplugged
1:0.088
And
I enable persistence
13.617
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
43.876
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.346
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.064
And
available upgrades have been checked
1.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.219
And
I can open the Additional Software configuration window from the notification
3.070
And
I shutdown Tails and wait for the computer to power off
2:7.870
And
I start Tails from USB drive "__internal" with network unplugged
1:3.253
And
I enable persistence
15.253
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
40.628
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.963
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084