And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.969
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.614
And
I accept adding "cowsay" to Additional Software
6.967
And
Additional Software is correctly configured for package "cowsay"
0.971
And
I shutdown Tails and wait for the computer to power off
6.623
And
I start Tails from USB drive "__internal" with network unplugged
58.706
And
I enable persistence
13.805
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
38.151
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.261
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.058
And
available upgrades have been checked
0.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.872
And
I can open the Additional Software configuration window from the notification
2.897
And
I shutdown Tails and wait for the computer to power off
18.909
And
I start Tails from USB drive "__internal" with network unplugged
59.710
And
I enable persistence
13.526
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.451
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.811
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090