And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.492
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.711
And
I accept adding "cowsay" to Additional Software
6.860
And
Additional Software is correctly configured for package "cowsay"
0.979
And
I shutdown Tails and wait for the computer to power off
6.478
And
I start Tails from USB drive "__internal" with network unplugged
1:0.488
And
I enable persistence
12.452
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.110
And
I log in to a new session
40.753
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.078
And
available upgrades have been checked
1.171
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.382
And
I can open the Additional Software configuration window from the notification
2.769
And
I shutdown Tails and wait for the computer to power off
11.144
And
I start Tails from USB drive "__internal" with network unplugged
1:0.770
And
I enable persistence
13.003
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
46.040
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089