And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.686
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.503
And
I accept adding "cowsay" to Additional Software
6.529
And
Additional Software is correctly configured for package "cowsay"
1.007
And
I shutdown Tails and wait for the computer to power off
6.590
And
I start Tails from USB drive "__internal" with network unplugged
1:3.988
And
I enable persistence
18.451
And
I configure APT to prefer an old version of cowsay
0.043
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
38.632
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.487
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.072
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.148
And
I can open the Additional Software configuration window from the notification
3.699
And
I shutdown Tails and wait for the computer to power off
2:2.540
And
I start Tails from USB drive "__internal" with network unplugged
1:1.510
And
I enable persistence
13.264
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.761
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.770
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.120