And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:14.076
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.624
And
I accept adding "cowsay" to Additional Software
6.532
And
Additional Software is correctly configured for package "cowsay"
0.940
And
I shutdown Tails and wait for the computer to power off
4.568
And
I start Tails from USB drive "__internal" with network unplugged
58.225
And
I enable persistence
11.279
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
37.138
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.955
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.065
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.097
And
I can open the Additional Software configuration window from the notification
3.966
And
I shutdown Tails and wait for the computer to power off
19.238
And
I start Tails from USB drive "__internal" with network unplugged
57.707
And
I enable persistence
13.681
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.976
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100