And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.155
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.152
And
I accept adding "cowsay" to Additional Software
6.192
And
Additional Software is correctly configured for package "cowsay"
0.983
And
I shutdown Tails and wait for the computer to power off
6.804
And
I start Tails from USB drive "__internal" with network unplugged
1:10.878
And
I enable persistence
15.193
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
38.619
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.312
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.074
And
available upgrades have been checked
0.192
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.937
And
I can open the Additional Software configuration window from the notification
3.099
And
I shutdown Tails and wait for the computer to power off
2:7.727
And
I start Tails from USB drive "__internal" with network unplugged
1:1.281
And
I enable persistence
12.030
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.088
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.471
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096