And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.531
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.644
And
I accept adding "cowsay" to Additional Software
6.931
And
Additional Software is correctly configured for package "cowsay"
1.080
And
I shutdown Tails and wait for the computer to power off
4.386
And
I start Tails from USB drive "__internal" with network unplugged
1:1.727
And
I enable persistence
13.976
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
43.200
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.878
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.085
And
available upgrades have been checked
1.162
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.850
And
I can open the Additional Software configuration window from the notification
3.124
And
I shutdown Tails and wait for the computer to power off
2:1.836
And
I start Tails from USB drive "__internal" with network unplugged
1:8.178
And
I enable persistence
11.281
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
40.263
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.496
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076