And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.778
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.063
And
I accept adding "cowsay" to Additional Software
6.771
And
Additional Software is correctly configured for package "cowsay"
0.961
And
I shutdown Tails and wait for the computer to power off
4.615
And
I start Tails from USB drive "__internal" with network unplugged
1:7.776
And
I enable persistence
13.058
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
37.699
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.145
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.497
And
I can open the Additional Software configuration window from the notification
3.717
And
I shutdown Tails and wait for the computer to power off
13.152
And
I start Tails from USB drive "__internal" with network unplugged
1:0.510
And
I enable persistence
12.779
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.943
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087