And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:36.997
And
I configure APT to prefer an old version of cowsay
0.045
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
33.695
And
I accept adding "cowsay" to Additional Software
5.492
And
Additional Software is correctly configured for package "cowsay"
1.181
And
I shutdown Tails and wait for the computer to power off
7.027
And
I start Tails from USB drive "__internal" with network unplugged
1:5.921
And
I enable persistence
14.612
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
40.654
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.092
And
available upgrades have been checked
0.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.250
And
I can open the Additional Software configuration window from the notification
3.459
And
I shutdown Tails and wait for the computer to power off
19.459
And
I start Tails from USB drive "__internal" with network unplugged
1:1.275
And
I enable persistence
14.320
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
44.478
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.371
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.451
And
the network is plugged
1.027
Then
the Additional Software upgrade service has started
0.223
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.130