And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.713
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.473
And
I accept adding "cowsay" to Additional Software
4.900
And
Additional Software is correctly configured for package "cowsay"
1.004
And
I shutdown Tails and wait for the computer to power off
7.886
And
I start Tails from USB drive "__internal" with network unplugged
1:3.367
And
I enable persistence
15.630
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
41.982
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.061
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.070
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
9.036
And
I can open the Additional Software configuration window from the notification
3.628
And
I shutdown Tails and wait for the computer to power off
15.142
And
I start Tails from USB drive "__internal" with network unplugged
1:9.275
And
I enable persistence
13.316
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
39.934
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.245
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107