And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:45.814
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.669
And
I accept adding "cowsay" to Additional Software
6.227
And
Additional Software is correctly configured for package "cowsay"
1.049
And
I shutdown Tails and wait for the computer to power off
6.445
And
I start Tails from USB drive "__internal" with network unplugged
1:8.746
And
I enable persistence
15.140
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
45.533
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.484
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.253
And
I can open the Additional Software configuration window from the notification
2.246
And
I shutdown Tails and wait for the computer to power off
2:2.627
And
I start Tails from USB drive "__internal" with network unplugged
1:1.768
And
I enable persistence
22.019
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
43.181
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.138
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.280
Then
the Additional Software upgrade service has started
0.197
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.113