And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.084
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.183
And
I accept adding "cowsay" to Additional Software
6.035
And
Additional Software is correctly configured for package "cowsay"
0.889
And
I shutdown Tails and wait for the computer to power off
6.505
And
I start Tails from USB drive "__internal" with network unplugged
58.634
And
I enable persistence
12.362
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
39.786
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.515
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.073
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.177
And
I can open the Additional Software configuration window from the notification
2.203
And
I shutdown Tails and wait for the computer to power off
18.184
And
I start Tails from USB drive "__internal" with network unplugged
58.630
And
I enable persistence
12.336
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.661
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.471
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102